Navigation Use the navigation tree to interact with the database.


General Inclusions and Exclusions

General Project Inclusions and Exclusions for conveyors systems.



General Inclusions and Exclusions
Geotechnical survey and site survey
Relocation of Existing Services
Modifications to Existing Site
Material flow testing
Diversion of roads, haul roads, pipelines, rivers etc.
Spillage handling
Drainage
Conveyor dynamics analysis
Mechanical and structural engineering design and drafting
Operational spares
LV lighting and small power transformers
Belt rip protection systems
Centralized lubrication
Dust suppression
Compressed Air
Water management, process water, sewage etc.
Civil work including clearing, earthworks, design and grouting
Motor control center or programming of MCC components
Lighting on conveyors and in transfer stations
Area lighting, high mast lighting etc.
Power conditioning and power factor correction equipment
Integration to higher level PLC and SCADA systems
Electrical work other than on-board conveyor electrical equipment
HAZOP studies and resultant design changes.
Trenching
Fiber optic or copper cable to PLC / SCADA system
Transformers
Variable speed drives
Access and haul roads
All underground flame proof equipment.
Clearing of construction area of all debris, material , existing steelwork , civils etc. To allow for all new construction work.
Any blasting, cutting or trimming of underground rock or coal.
Supply of all fasteners, gaskets, packers, shims, masonry anchors and loose fittings as required to do the installation of the works.
Packing, marking and transport of all material and equipment to site.
Corrosion protection and touch up paint.
Compliance with site safety and environmental training requirements prior to commencing work, personnel medical and safety inductions.
Testing and commissioning of the equipment.
Conveyor motor cabling and mini substations mounted on skid frames.
Mobilization of all supervision, labour, materials, power supply, tools, construction plant and equipment, transport necessary for completion of the w...
Detailed conveyor structural loadings and bolt loadings.
First fill of lubricants.
Fire detection and/or suppression systems.Gantries elevated more than 7m should make an allowance for fire suppression at the head end of the conveyor...
Fire hydrants or fire extinguishers .
All civil work design required for the installation of the equipment.
All civil work precast fabrication required for the installation of the conveyor.
All civil work installation required for the installation of the equipment.
All transportation of conveyor equipment on site.
Belt magnets for tramp metal removal.
Belt scales.
All equipment safety signage.
All splicing , joining and repair of belting.
Rationalization for drives , gearboxes , pulleys , belting or idlers.
Site Surveying
Procurement of equipment, spares and sub-contactors
Spares holding optimization
Potable water.
All area separation , including vehicle gates, pedestrian gates , fences etc.
Interlocking Industrial Paving
Surface conveyors without dog housing to have hold down points for wind on the head and tail frame.
Conveyors at river crossings are fully enclosed.
Surface runoff at transfer points are locally contained by means of bund walls linked to silt traps. Silt traps with drying pads are provided at all t...
An overall width of 8 m for single conveyors and 20 m for dual conveyors has been allowed for. This makes provision for the conveyors and associated s...
Conveyors are fitted with HDPE idlers to minimize noise.
Transfer points are enclosed and fitted with dust suppression systems to minimise dust pollution.
No transfer points, loading points or discharge points are located within wetlands.
Considerations are to be made for conveyors crossing wetlands.
For service roads across wetland areas, culverts will be placed at regular intervals (maximum spacing of approximately 50 m) to allow the through flow...
All lifting and rigging equipment.
Underground personal safety devices ( Lamp , emergency rescue pack and battery pack )
Personnel protective equipment
Toilets
Site Security and equipment lock-up.
Communications Underground
Washing down of area to clear spillage.
Considerations for the support of the mass of conveyor drives during maintenance on the low speed coupling.
Fire booster water truck points.
A risk of water collecting on the belt – belt slipping is eminent and require that the design must make sure that water can run off from all the belt'...
Belt snapping at the highest point of tension and risk for the inclined conveyor feeding the silo which may result in potential structural damages whi...
Programmable Logic Controller (PLC) and SCADA software development
No allowance is made to changes to the current concept design. The contractor does not necessarily agree with the concept.The impact of such a change ...
All drawings and documents available will be made available in native format and only minor changes to these documents and drawings will be necessary ...
The standard drawings produced by the FEL3(BFS) contractor are acceptable and can be used without significant modification by the successful FEL4 cont...
Structural Steel Detailing
No time allowed for Environmental Services
Costs related to vendor/contractor visits and assessments (including Quality teams)
Hydro-geological or mine exploratory geotechnical investigations
Any negotiations with Eskom or Transet.
Any time for As Built drawings , or offsite support for construction managamenet.
All site rigging points, including working at heights rigging locations and lifting points for mechanical and electrical equipment maintenance.
Substation airconditioning design , UPS for AC and redundancy requirements.






Engine Beta 0.9

Introduction

Collaborate

Would you like to list your product or become a local Shiftbulk agent?

Site Details

Sign up to get started!

Sign up its free.

Issues

List your issues with the interface.

More details

Terms | Privacy | Contact

Shiftbulk

Shiftbulk is a collaborative platform for creating detailed design calculations and purchasing schedules for belt conveyor systems

Built with Heavy-lifting and Fraternate