Navigation Use the navigation tree to interact with the database.


General Notes - Platework

General Notes



Notes
ALL PLATE WORK TO BE 8 THK STEEL EN 10025-2-S355JR.
ALL HOLES TO BE 18 DIA FOR M16 BOLTS TO SANS 1700 GRADE 8.8 ( HOT DIPPED GALVANISED TO SANS 121 )
FABRICATOR TO SUPPLY ALL BOLTS, NUTS AND WASHERS NECESSARY FOR ASSEMBLY AND ERECTION, ALL LOOSE BOLTS, ETC TO BE BAGGED AND TAG MARKED WITH DRAWING NU...
ALL PACKS TO BE LAMINATED AND WIRED TO PLATEWORK FOR DELIVERY.
ALL CHUTE WORK FLANGE BOLT HOLE SPACING TO BE 150MM MAX FOR WET CHUTES AND 200MM MAX FOR DRY CHUTES.
ALL STEELWORK TO BE HARD STAMPED WITH MARK NO. AND DRAWING NO. TO WITHSTAND SANDBLASTING.
LINER PATTERNS SHOWN ON DRAWINGS ARE INDICATIVE ONLY TO IDENTIFY THE TYPE OF LINER AND ITS ASSOCIATED DESCRIPTION.
THE SPECIFICATION FOR THE LINERS ARE INDICATED ON EACH DRAWING.
ALL WET LINER BOLTS TO BE SEALED WITH CLEAR SILICONE SEALANT.
STEEL LINERS TO BE LIMITED TO 25KG MAX FOR HANDLING PURPOSES.
GAPS BETWEEN LINER PLATES TO BE 5mm MAXIMUM .
FABRICATOR TO SUPPLY SUITABLE LIFTING LUGS FOR ALL PLATEWORK . THESE LIFTING LUGS SHOULD BE 12mm THK MINIUM AND BE SUITABLE FOR LIFTING PURPOSES AND I...
ALL INTERNAL SURFACES AND SURFACES UNDER STEEL LINERS TO BE PAINTED AS PER INDICATED PAINTING SPECIFICATION.
ALL WELDS TO BE 6 CONT. F.W WATERTIGHT (TO COMPLY WITH SANS CODE OF PRACTICE 044 ANSI/AWS D1.1)
HAWK GLADIATOR PROBES TO BE PROTECTED ON THE EXPOSED INSIDE WALL OF THE CHUTE BODY BY A CERAMIC SHEET 3MM THICK (BOTH SIDES).
FINAL COLOUR TO BE ADMIRALTY GREY G12 TO SANS 10140-3 SECTION 5.3.3.3 TABLE 3 IN SPECIFICATION ENG-GEN-ADM-STD-005
COATING SPECIFICATION TO USED IS AP APEC 102 IN APPENDIX F OF AP SPEC 164050
ALL WET PLATEWORK TO BE SEALED WITH CLEAR SILICONE SEALANT.
ALL DRY PLATEWORK TO BE SEALED WITH COMPRIBAND OR GARLOCK SEALING TAPE ( OR EQUIVALENT ).






Engine Beta 0.9

Introduction

Collaborate

Would you like to list your product or become a local Shiftbulk agent?

Site Details

Sign up to get started!

Sign up its free.

Issues

List your issues with the interface.

More details

Terms | Privacy | Contact

Shiftbulk

Shiftbulk is a collaborative platform for creating detailed design calculations and purchasing schedules for belt conveyor systems

Built with Heavy-lifting and Fraternate