Table Search
Navigation
Use the navigation tree to interact with the components.
Troughing 5 Roll
Due to variations in material characteristics and physical conveyor design (Height and length), the selection of idlers is unique to most applications. The items in this section are grouped design parameters for carrying idlers used on this site.
| C (kN) | D (mm) | E (mm) | Frame Mass (Kg) | Rotating Mass (Kg) | Url | Roll Mass (Kg) | Idler Set Mass (Kg) | Image | Length of Flat (mm) | Idler Gauge Length (mm) | Idler Roll Length (mm) | Idler Roll Diameter (mm) | Number of Rolls(per base) | Nominal Wall Thickness (mm) | D - Outer race diameter (mm) | B - Bearing width (mm) | Seal Thickness (mm) | Designation | Limiting speed (r/min) | Reference speed (r/min) | C0 (kN) | Pu (kN) | A (mm) | Shell Mass (Kg) | Bearing Housing Mass (Kg) | D - Circlip (mm) | b - Circlip (mm) | t - Circlip (mm) | Idler Seal Design | % Bearing Width (%) | Shell Weld (mm) | Idler Type | Idler Frame Design | Shaft Series (mm) | Belt Width (mm) | Wing Roll Angle (Degree) | Idler Roll Material | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1327 | 20 | 1660 | - | 5 | Link | 6.1 | 52.6 |
|
- | - | 300 | 127 | 5 | Troughing 5 Roll | Underslung Offset Belt Saver | 25 | 1350 | 35 | - | |||||||||||||||||||
| 1508 | 184 | 1812 | 24.4 | 5.4 | Link | 6.7 | 57.9 |
|
- | - | 340 | 127 | 5 | Troughing 5 Roll | Underslung Offset Belt Saver | 25 | 1500 | 35 | - | |||||||||||||||||||
| 1312 | 7 | 1660 | 22.1 | 6.1 | Link | 7.5 | 59.6 |
|
- | - | 300 | 152 | 5 | Troughing 5 Roll | Underslung Offset Belt Saver | 25 | 1350 | 35 | - | |||||||||||||||||||
| 1494 | 172 | 1812 | 24.4 | 6.7 | Link | 8.2 | 65.4 |
|
14 | 350 | 340 | 152 | 5 | Troughing 5 Roll | Underslung Offset Belt Saver | 30 | 1500 | 35 | - | |||||||||||||||||||
| - | - | - | - | - | Link | - | - |
|
14 | 350 | 340 | 152 | 5 | Troughing 5 Roll | Underslung Offset Belt Saver | 30 | 1500 | 45 | - | |||||||||||||||||||
| 285 | - | - | 45 | 9.8 | Link | 12.4 | 107 |
|
14 | 485 | 475 | 152 | 5 | Troughing 5 Roll | Troughing 5 Roll | 30 | 2100 | 45 | Steel Roll | |||||||||||||||||||
| Link |
|
14 | 350 | 340 | 152 | 5 | Troughing 5 Roll | 3 Roll, offset, top mounted, tubular | 30 | 1500 | 45 | Steel Roll | ||||||||||||||||||||||||||
| 14.8 | 6.36 | Link |
|
12 | 410 | 400 | 152 | 5 | 4 | 52 | 15 | 15.00 | 6205 | 18000 | 28000 | 7.8 | 0.335 | 2058 | 5.85 | 0.51 | 23.2 | 3 | 1.2 | Integral Bearing Sealing | 100 | 4 | Troughing 5 Roll | Troughing 5 Roll | 25 | 1800 | 45 | Steel Roll |
Sign up for free to join this conversation on ShiftBulk.
Already have an account? Sign in to comment
Already have an account? Sign in to comment