Quote your conveyor!
Your Details
Extra InformationAdd extra info about the conveyor.
Anim pariatur cliche reprehenderit, enim eiusmod high life accusamus terry richardson ad squid. Nihil anim keffiyeh helvetica, craft beer labore wes anderson cred nesciunt sapiente ea proident.
Your items for quote
Cart
[
{
"_id": "5f686e31668d8c0004d8d4c6",
"elementID": "5f684da8668d8c0004d8d480",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Liquid Nozzles",
"descriptionpage": "Liquid Nozzles",
"detail": "Common spray patterns include: Full cone, hollow cone, solid stream, flat fan and mist or fog. Spray nozzles are categorized according to the energy input used to cause atomization (the breakup of the fluid into droplets.) The table below shows applicable liquid spray nozzles for bulk materials handling dust suppression systems.",
"template": "None",
"icon": "fas fa-shopping-cart",
"headings": [
"Nozzle Size",
"k - friction factor",
"5 Bar",
"20 Bar",
"Type"
],
"tabs": [],
"parent": "5dd7b526e363bf4554744f52",
"slug": "liquid-nozzles"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Liquid Nozzles",
"detail": "Common spray patterns include: Full cone, hollow cone, solid stream, flat fan and mist or fog. Spray nozzles are categorized according to the energy input used to cause atomization (the breakup of the fluid into droplets.) The table below shows applicable liquid spray nozzles for bulk materials handling dust suppression systems.",
"childType": "5f684f2e668d8c0004d8d482",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-09-21T09:11:13.601Z",
"__v": 0
},
{
"_id": "5f688168925c5900046c5d02",
"elementID": "5f682dea668d8c0004d8d47d",
"revision": "revision",
"active": "true",
"calculation": "false",
"name": "Pump Skid",
"detail": "Pump Skid",
"childType": "58aa74140b9d3241280ecf17",
"entry": {
"description": "Pump Skid",
"descriptionpage": "Pump Skid",
"detail": "Pump Skid",
"template": "group",
"icon": "fas fa-cog",
"headings": [
"description",
"detail",
"order"
],
"tabs": [],
"parent": "5f682dea668d8c0004d8d47d",
"slug": "pump-skid"
},
"parentid": "58d222d18d9bfd28846eb792",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-09-21T10:33:12.214Z",
"__v": 0
},
{
"_id": "5f6886c88b5d7b000433995a",
"elementID": "5a6071fb5a0a35194865e34e",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Load Cells Products",
"descriptionpage": "Load Cells Products",
"detail": "A load cell is a force transducer that converts a force such as tension, compression, pressure, or torque into an electrical signal that can be measured and standardized. ",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"Accuracy",
"Tension Rating"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a6071c35a0a35194865e34d",
"slug": "load-cells-products"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Load Cells Products",
"detail": "A load cell is a force transducer that converts a force such as tension, compression, pressure, or torque into an electrical signal that can be measured and standardized. ",
"childType": "5a60721b5a0a35194865e350",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-09-21T10:56:08.918Z",
"__v": 0
},
{
"_id": "5f6993838b5d7b000433995e",
"elementID": "5a2a1dc72e1c1330dc94ead8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Wire Rope Products",
"descriptionpage": "Wire Rope Products",
"detail": "Wire rope consists of several strands of metal wire twisted into a helix forming a composite rope in a pattern of a laid rope. Wire ropes are used in load lifting and power transmission in the bulk material sector.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1ac92e1c1330dc94eab9",
"slug": "wire-rope-products"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Wire Rope Products",
"detail": "Wire rope consists of several strands of metal wire twisted into a helix forming a composite rope in a pattern of a laid rope. Wire ropes are used in load lifting and power transmission in the bulk material sector.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5d846432b0bd9f0004f40bb8",
"created": "2020-09-22T06:02:43.106Z",
"__v": 0
},
{
"_id": "5f6882e88b5d7b0004339955",
"elementID": "5a6071c35a0a35194865e34d",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Load Cell Units",
"descriptionpage": "Load Cell Units",
"detail": "A load cell is a force transducer that converts a force such as tension, compression, pressure, or torque into an electrical signal that can be measured and standardized. ",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1ac92e1c1330dc94eab9",
"slug": "load-cell-units"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Load Cell Units",
"detail": "A load cell is a force transducer that converts a force such as tension, compression, pressure, or torque into an electrical signal that can be measured and standardized. ",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5d846432b0bd9f0004f40bb8",
"created": "2020-09-21T10:39:36.684Z",
"__v": 0
},
{
"_id": "5f6b14a7a212cd0004584c51",
"elementID": "5a52feef94a70b3af4f399b6",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Motorized Hand Winches",
"descriptionpage": "Motorized Hand Winches",
"detail": "The new DYMOT range of MOTORISED SAFETY WINCHES has been specially developed to eliminate the danger found on normal ratchet held loads in hand winches. The winches use an automatic clamping and ratchet type brake whereby the ratchets are never disengaged and the load is moved up or down simply by running the motor FWD/REV. A further improvement which has been achieved in the new design of some of the models is that the winch now features bearings on all shafts and gears. All lubrication points are external to the covers.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"Motor Output power",
"SWL Top Layer"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1db92e1c1330dc94ead7",
"slug": "motorized-hand-winches"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Motorized Hand Winches",
"detail": "The new DYMOT range of MOTORISED SAFETY WINCHES has been specially developed to eliminate the danger found on normal ratchet held loads in hand winches. The winches use an automatic clamping and ratchet type brake whereby the ratchets are never disengaged and the load is moved up or down simply by running the motor FWD/REV. A further improvement which has been achieved in the new design of some of the models is that the winch now features bearings on all shafts and gears. All lubrication points are external to the covers.",
"childType": "5a5301e594a70b3af4f399bb",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-09-23T09:25:59.552Z",
"__v": 0
},
{
"_id": "5f6b0a8ea212cd0004584c44",
"elementID": "5a2a1db92e1c1330dc94ead7",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Winch Arrangements",
"descriptionpage": "Winch Arrangements",
"detail": "The subsections for this item cover a collection of winch arrangement systems on a bulk material handling belt conveyor system take-up.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1ac92e1c1330dc94eab9",
"slug": "winch-arrangements"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Winch Arrangements",
"detail": "The subsections for this item cover a collection of winch arrangement systems on a bulk material handling belt conveyor system take-up.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-09-23T08:42:54.058Z",
"__v": 0
},
{
"_id": "5f6b153ca212cd0004584c54",
"elementID": "5f6b10bda212cd0004584c46",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Take Up Winches",
"descriptionpage": "Take Up Winches",
"detail": "The DYMOT range of power take-up winches have been specially developed for use on long overland and underground conveyors and are ideally suited for use with automatic tensioning systems. The unique design, using a combination of worm and epicyclic gears offer numerous advantages over the conventional designs. The new design uses a failsafe disc brake with IP65 protection; this overcomes the problem previously encountered with rust which resulted in high maintenance and brake failure. This design has also eliminated the need for a brake drum type coupling through the use of a double input shaft primary gearbox.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"SWL Top Layer"
],
"tabs": [],
"parent": "5a2a1db92e1c1330dc94ead7",
"slug": "take-up-winches"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Take Up Winches",
"detail": "The DYMOT range of power take-up winches have been specially developed for use on long overland and underground conveyors and are ideally suited for use with automatic tensioning systems. The unique design, using a combination of worm and epicyclic gears offer numerous advantages over the conventional designs. The new design uses a failsafe disc brake with IP65 protection; this overcomes the problem previously encountered with rust which resulted in high maintenance and brake failure. This design has also eliminated the need for a brake drum type coupling through the use of a double input shaft primary gearbox.",
"childType": "5a5301e594a70b3af4f399bb",
"userID": "5d846432b0bd9f0004f40bb8",
"created": "2020-09-23T09:28:28.980Z",
"__v": 0
},
{
"_id": "5f7aa9da25ca5a000454085e",
"elementID": "591bcee023ccb623685baf85",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Stage 1 Belt Scraper",
"descriptionpage": "Stage 1 Belt Scraper",
"detail": "Carry back is material that sticks to the belt past the discharge point and then drops off along the conveyor’s return run. When material gets onto the return belt, it is carried back to the tail pulley. This “carry back “is likely to cause belt cover damage, lagging damage, tracking issues, and in extreme cases belt damage or belt tears. Scrapers are used at the discharge point of a conveyor to remove material that remains on the belt. Scraper arrangements vary based on the size of the belt as well as how likely the material is to stick to the belt. In large tonnage applications the scrapers can remove many tonnes of material in a day and require dedicated maintenance to ensure proper operation of the belt conveyor system.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "591bceab23ccb623685baf82",
"slug": "stage-1-belt-scraper"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Stage 1 Belt Scraper",
"detail": "Carry back is material that sticks to the belt past the discharge point and then drops off along the conveyor’s return run. When material gets onto the return belt, it is carried back to the tail pulley. This “carry back “is likely to cause belt cover damage, lagging damage, tracking issues, and in extreme cases belt damage or belt tears. Scrapers are used at the discharge point of a conveyor to remove material that remains on the belt. Scraper arrangements vary based on the size of the belt as well as how likely the material is to stick to the belt. In large tonnage applications the scrapers can remove many tonnes of material in a day and require dedicated maintenance to ensure proper operation of the belt conveyor system.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-05T05:06:34.413Z",
"__v": 0
},
{
"_id": "5f7ab900b3007c00041b225a",
"elementID": "5cd4115ea2a5383fd8014955",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Lighting Mounting",
"descriptionpage": "Lighting Mounting",
"detail": "Various mounting systems are available for belt conveyor illumination. The table below covers some of the optional bought-out mounting systems.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1ada2e1c1330dc94eaba",
"slug": "lighting-mounting"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Lighting Mounting",
"detail": "Various mounting systems are available for belt conveyor illumination. The table below covers some of the optional bought-out mounting systems.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-05T06:11:12.464Z",
"__v": 0
},
{
"_id": "5f7ab93bb3007c00041b225b",
"elementID": "5cd41341a2a5383fd801495a",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Flood Lights",
"descriptionpage": "Flood Lights",
"detail": "The table below covers typical conveyor illumination light sources.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1ada2e1c1330dc94eaba",
"slug": "flood-lights"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Flood Lights",
"detail": "The table below covers typical conveyor illumination light sources.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-05T06:12:11.471Z",
"__v": 0
},
{
"_id": "5f7d34f74bd5580004e7effa",
"elementID": "5b0d3a9b4dbfa62894d30015",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Handrails",
"descriptionpage": "Handrails",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor handrails.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5b0d3a884dbfa62894d30014",
"slug": "handrails"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Handrails",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor handrails.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:24:39.448Z",
"__v": 0
},
{
"_id": "5f7ab882b3007c00041b2259",
"elementID": "5a2a1ada2e1c1330dc94eaba",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Illumination",
"descriptionpage": "Belt Illumination",
"detail": "As many conveyor belt systems are operated in low light areas, adequate illumination is required for maintenance staff to care for these systems. The categories to follow cover equipment purchasing options for belt conveyor illumination.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "belt-illumination"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Illumination",
"detail": "As many conveyor belt systems are operated in low light areas, adequate illumination is required for maintenance staff to care for these systems. The categories to follow cover equipment purchasing options for belt conveyor illumination.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-05T06:09:06.672Z",
"__v": 0
},
{
"_id": "5f7d32484bd5580004e7eff5",
"elementID": "5e3fda1587e5c539b89e91b2",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Rail Wheel Drives ",
"detail": "Wheel Drives for rail mounted bulk materials handling equipment.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5e3fd8e787e5c539b89e91af",
"slug": "rail-wheel-drives"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Rail Wheel Drives ",
"detail": "Wheel Drives for rail mounted bulk materials handling equipment.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:13:12.516Z",
"__v": 0
},
{
"_id": "5f7aa2bc25ca5a0004540859",
"elementID": "591bceab23ccb623685baf82",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Cleaning Systems",
"descriptionpage": "Belt Cleaning Systems",
"detail": "The subsections for this item cover a collection of belt cleanings used for removal of wet and dry material from a conveyor belt system, through mechanical scraping action. ",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "belt-cleaning-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Cleaning Systems",
"detail": "The subsections for this item cover a collection of belt cleanings used for removal of wet and dry material from a conveyor belt system, through mechanical scraping action. ",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-05T04:36:12.479Z",
"__v": 0
},
{
"_id": "5f7aa9dd25ca5a000454085f",
"elementID": "591a8d41cb21ed397487c122",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Stage 2 Belt Scraper",
"descriptionpage": "Stage 2 Belt Scraper",
"detail": "Carry back is material that sticks to the belt past the discharge point and then drops off along the conveyor’s return run. When material gets onto the return belt, it is carried back to the tail pulley. This “carry back “is likely to cause belt cover damage, lagging damage, tracking issues, and in extreme cases belt damage or belt tears. Scrapers are used at the discharge point of a conveyor to remove material that remains on the belt. Scraper arrangements vary based on the size of the belt as well as how likely the material is to stick to the belt. In large tonnage applications the scrapers can remove many tonnes of material in a day and require dedicated maintenance to ensure proper operation of the belt conveyor system.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "591bceab23ccb623685baf82",
"slug": "stage-2-belt-scraper"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Stage 2 Belt Scraper",
"detail": "Carry back is material that sticks to the belt past the discharge point and then drops off along the conveyor’s return run. When material gets onto the return belt, it is carried back to the tail pulley. This “carry back “is likely to cause belt cover damage, lagging damage, tracking issues, and in extreme cases belt damage or belt tears. Scrapers are used at the discharge point of a conveyor to remove material that remains on the belt. Scraper arrangements vary based on the size of the belt as well as how likely the material is to stick to the belt. In large tonnage applications the scrapers can remove many tonnes of material in a day and require dedicated maintenance to ensure proper operation of the belt conveyor system.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-05T05:06:37.705Z",
"__v": 0
},
{
"_id": "5f7d320b4bd5580004e7eff4",
"elementID": "5e3fd8e787e5c539b89e91af",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Wheel Drive Systems",
"descriptionpage": "Wheel Drive Systems",
"detail": "The subsections for this item cover a collection of Wheel Drives for rail mounted bulk materials handling equipment.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "wheel-drive-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Wheel Drive Systems",
"detail": "The subsections for this item cover a collection of Wheel Drives for rail mounted bulk materials handling equipment.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:12:11.638Z",
"__v": 0
},
{
"_id": "5f7d363f4bd5580004e7effc",
"elementID": "5a4e36b44b8df750305f0c6c",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "General Engineering Wire Rope - WRC",
"detail": "6x36 WS = 6x[1+7+(7+7)+14] IWRC Features: • Galvanised rope lubricated with light dry lubrication A1 or dry • Ungalvanised rope lubricated with heavy lubrication A1 or A2 • Also used for the manufacture of slings • All rope manufactured generally to EN 12385 • Supplied with manufacturer’s certificate of conformance • Ideal for hot metal cranes, winches, drill rigs • Available in left or right hand lay",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Rope Diameter",
"Unit Weight",
"Minimum Breaking Load (MBL) @ 1770 N/mm2",
"Minimum Breaking Load (MBL) @ 1960 N/mm2",
"Supplier"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1dc72e1c1330dc94ead8",
"slug": "general-engineering-wire-rope-wrc"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "General Engineering Wire Rope - WRC",
"detail": "6x36 WS = 6x[1+7+(7+7)+14] IWRC Features: • Galvanised rope lubricated with light dry lubrication A1 or dry • Ungalvanised rope lubricated with heavy lubrication A1 or A2 • Also used for the manufacture of slings • All rope manufactured generally to EN 12385 • Supplied with manufacturer’s certificate of conformance • Ideal for hot metal cranes, winches, drill rigs • Available in left or right hand lay",
"childType": "5a52f38494a70b3af4f3998d",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:30:07.480Z",
"__v": 0
},
{
"_id": "5f7d371f4bd5580004e7efff",
"elementID": "5f7d36f84bd5580004e7effe",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Wire Ropes for Winches and Hoists",
"detail": "Capstan Winches These are used for such duties as hauling railway trucks in sidings. The rope must be Ordinary Lay and is required to be flexible, provide a good gripping surface on the face of the capstan and be reasonably resistant to wear. Recommended constructions are 6 x 24(15/9/F)/F and 5 x 19 Marline Clad. Overhead Hoists and Small Winches The most commonly used ropes are of the 6 x 36(14/7 + 717/1 )/F and 6 x 19(9/9/ 1)/F constructions in Ordinary Lay. In cases where abrasion could be a problem Langs Lay Rope is recommended. Steel Wire Rope Wire Ropes for Drilling 6x19 Seale = 6x(1+9+9) IWRC Features: • Galvanised rope lubricated with light dry lubrication • Ungalvanised rope lubricated with A1 type lubrication • All rope manufactured generally to EN 12385 • Supplied with manufacturer's certificate of conformance • Suitable for conveyor ropes and drilling",
"icon": "fas fa-shopping-cart",
"headings": [
"description",
"detail",
"order"
],
"tabs": [],
"parent": "5a2a1dc72e1c1330dc94ead8",
"slug": "wire-ropes-for-winches-and-hoists"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Wire Ropes for Winches and Hoists",
"detail": "Capstan Winches These are used for such duties as hauling railway trucks in sidings. The rope must be Ordinary Lay and is required to be flexible, provide a good gripping surface on the face of the capstan and be reasonably resistant to wear. Recommended constructions are 6 x 24(15/9/F)/F and 5 x 19 Marline Clad. Overhead Hoists and Small Winches The most commonly used ropes are of the 6 x 36(14/7 + 717/1 )/F and 6 x 19(9/9/ 1)/F constructions in Ordinary Lay. In cases where abrasion could be a problem Langs Lay Rope is recommended. Steel Wire Rope Wire Ropes for Drilling 6x19 Seale = 6x(1+9+9) IWRC Features: • Galvanised rope lubricated with light dry lubrication • Ungalvanised rope lubricated with A1 type lubrication • All rope manufactured generally to EN 12385 • Supplied with manufacturer's certificate of conformance • Suitable for conveyor ropes and drilling",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:33:51.162Z",
"__v": 0
},
{
"_id": "5f8820b77f55db00045b32e7",
"elementID": "591a8d4bcb21ed397487c123",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Safety Equipment",
"descriptionpage": "Belt Safety Equipment",
"detail": "To be legally compliant with local government safety minimum requirements. The categories in this sub-section describe various belt safety devices used for the protection of equipment and personnel.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "belt-safety-equipment"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Safety Equipment",
"detail": "To be legally compliant with local government safety minimum requirements. The categories in this sub-section describe various belt safety devices used for the protection of equipment and personnel.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-15T10:13:11.810Z",
"__v": 0
},
{
"_id": "5f891a4f7f55db00045b32ee",
"elementID": "5a55fc8f3229f0462088534d",
"revision": "revision",
"active": "true",
"calculation": "false",
"name": "Belt Misalignment",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. In order to prevent the “wandering” belt from moving off the idlers and abrading structural steel , or in some situations causing sudden “belt jams” , it is necessary to install belt misalignment switches which will pick up excess tracking issues with the conveyor. The categories in this sub-section describe various belt safety devices used as Belt Misalignment Detectors.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"entry": {
"description": "Belt Misalignment",
"descriptionpage": "Belt Misalignment",
"detail": "Belt Misalignment switches are used to detect a misalignment and to reduce damage to the conveyor belt and to the conveyor structure.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1f0d2e1c1330dc94eadf",
"slug": "belt-misalignment"
},
"parentid": "58d222d18d9bfd28846eb792",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T03:58:07.396Z",
"__v": 0
},
{
"_id": "5f894cfb7f55db00045b330b",
"elementID": "5a2a1fab2e1c1330dc94eae6",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Conveyor Primary Device",
"descriptionpage": "Conveyor Primary Device",
"detail": "To incorporate auxiliary equipment such as an emergency stop push button, take-up limit switches, fluid coupling temperature devices, block chute detectors, etc. into the long line protection system's network, an interface latching system has been provided, called the Primary Device.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5f89470f7f55db00045b32f8",
"slug": "conveyor-primary-device"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Conveyor Primary Device",
"detail": "To incorporate auxiliary equipment such as an emergency stop push button, take-up limit switches, fluid coupling temperature devices, block chute detectors, etc. into the long line protection system's network, an interface latching system has been provided, called the Primary Device.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T07:34:19.161Z",
"__v": 0
},
{
"_id": "5f894dbf7f55db00045b330c",
"elementID": "5a2a1fc82e1c1330dc94eae8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Conveyor Trip Switches",
"descriptionpage": "Conveyor Trip Switches",
"detail": "Based on legislation, the driving machinery of the conveyor belt installation should be stopped by any person from any point, along its length where access to the belt is possible. To achieve this pull wire trip switches are used on conveyor systems. The categories in this sub-section describe various pull wire trip switches and their components.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "conveyor-trip-switches"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Conveyor Trip Switches",
"detail": "Based on legislation, the driving machinery of the conveyor belt installation should be stopped by any person from any point, along its length where access to the belt is possible. To achieve this pull wire trip switches are used on conveyor systems. The categories in this sub-section describe various pull wire trip switches and their components.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T07:37:35.442Z",
"__v": 0
},
{
"_id": "5f7d39484bd5580004e7f001",
"elementID": "5a2a1d8f2e1c1330dc94ead5",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Sheaves Products",
"descriptionpage": "Sheaves",
"detail": "The subsections for this item cover a collection of sheave arrangements suitable for belt conveyor systems. Sheaves come in two orientations, horizontal and vertical.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1ac92e1c1330dc94eab9",
"slug": "sheaves-products"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Sheaves Products",
"detail": "The subsections for this item cover a collection of sheave arrangements suitable for belt conveyor systems. Sheaves come in two orientations, horizontal and vertical.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:43:04.612Z",
"__v": 0
},
{
"_id": "5f89169b7f55db00045b32ea",
"elementID": "5f44ce890407fb0004e78e7b",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Electronic Conventional Sounder",
"descriptionpage": "Electronic Conventional Sounder",
"detail": "Based on legislation , one or more devices are to be fitted and used to give all persons at any point ,where access to the conveyer belt installation is possible sufficient, prior warning for a period to be determined by the mines risk assessment, with a minimum period of 10 seconds, that any part of such a conveyer belt installation is about to be put into motion; The categories in this sub-section describe various belt safety devices used as Audio Visual Alarms.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a1ea62e1c1330dc94eada",
"slug": "electronic-conventional-sounder"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Electronic Conventional Sounder",
"detail": "Based on legislation , one or more devices are to be fitted and used to give all persons at any point ,where access to the conveyer belt installation is possible sufficient, prior warning for a period to be determined by the mines risk assessment, with a minimum period of 10 seconds, that any part of such a conveyer belt installation is about to be put into motion; The categories in this sub-section describe various belt safety devices used as Audio Visual Alarms.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T03:42:19.493Z",
"__v": 0
},
{
"_id": "5f891a3b7f55db00045b32ed",
"elementID": "5a2a1f0d2e1c1330dc94eadf",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Misalignment Detectors",
"descriptionpage": "Belt Misalignment Detectors",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. In order to prevent the “wandering” belt from moving off the idlers and abrading structural steel , or in some situations causing sudden “belt jams” , it is necessary to install belt misalignment switches which will pick up excess tracking issues with the conveyor. The categories in this sub-section describe various belt safety devices used as Belt Misalignment Detectors.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "belt-misalignment-detectors"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Misalignment Detectors",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. In order to prevent the “wandering” belt from moving off the idlers and abrading structural steel , or in some situations causing sudden “belt jams” , it is necessary to install belt misalignment switches which will pick up excess tracking issues with the conveyor. The categories in this sub-section describe various belt safety devices used as Belt Misalignment Detectors.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T03:57:47.682Z",
"__v": 0
},
{
"_id": "5f891ba87f55db00045b32ef",
"elementID": "5a2a1f372e1c1330dc94eae1",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Speed Sensors",
"descriptionpage": "Belt Speed Sensors",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. This can be done effectively by monitoring the speed variance between the conveyor belt and drive pulley RPM or the motor arrangements (powerpack) RPM. The categories in this sub-section describe various belt safety devices used as Belt Speed Sensors.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "belt-speed-sensors"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Speed Sensors",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. This can be done effectively by monitoring the speed variance between the conveyor belt and drive pulley RPM or the motor arrangements (powerpack) RPM. The categories in this sub-section describe various belt safety devices used as Belt Speed Sensors.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T04:03:52.301Z",
"__v": 0
},
{
"_id": "5f9646863947a600047aebc3",
"elementID": "5dd7b526e363bf4554744f52",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Dust Suppression Products",
"descriptionpage": "Dust Suppression Products",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor dust suppression products.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "dust-suppression-products"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Dust Suppression Products",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor dust suppression products.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:46:14.296Z",
"__v": 0
},
{
"_id": "5f8940d57f55db00045b32f2",
"elementID": "5a2a1f662e1c1330dc94eae3",
"revision": "revision",
"active": "true",
"calculation": "false",
"name": "Belt Tear Detectors",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt tear detectors.",
"childType": "58aa74140b9d3241280ecf17",
"entry": {
"description": "Belt Tear Detectors",
"descriptionpage": "Belt Tear Detectors",
"detail": "Longitudinal belt tear incidents can occur at the transfer chutes. It is crucial to detect these tears as early as possible, since even the smallest of tears will easily incur costly damage when left undetected.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "belt-tear-detectors"
},
"parentid": "58d222d18d9bfd28846eb792",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T06:42:29.760Z",
"__v": 0
},
{
"_id": "5f8940f47f55db00045b32f3",
"elementID": "5f4c6d7860d2c742d04303ea",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Tear Detectors - Mechanical",
"descriptionpage": "Tear Detectors - Mechanical",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt tear detectors.",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a1f662e1c1330dc94eae3",
"slug": "tear-detectors-mechanical"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Tear Detectors - Mechanical",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt tear detectors.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T06:43:00.128Z",
"__v": 0
},
{
"_id": "5f8953727f55db00045b3313",
"elementID": "5f4c9bfdd9deb40004a8b0d6",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Rip Detectors",
"descriptionpage": "Belt Rip Detectors",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt rip detectors.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "belt-rip-detectors"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Rip Detectors",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt rip detectors.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T08:01:54.305Z",
"__v": 0
},
{
"_id": "5f895b0a7f55db00045b3324",
"elementID": "5a2a1c132e1c1330dc94eac0",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Support Systems",
"descriptionpage": "Belt Support Systems",
"detail": "Loading and impact areas of a conveyor belt require additional support to protect the belt, idlers and structure. These areas are generally sealed with skirting, and this skirting sealing can be improved by correct belt support at these points. The sub-sections to follow cover optional equipment for belt support.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "belt-support-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Support Systems",
"detail": "Loading and impact areas of a conveyor belt require additional support to protect the belt, idlers and structure. These areas are generally sealed with skirting, and this skirting sealing can be improved by correct belt support at these points. The sub-sections to follow cover optional equipment for belt support.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T08:34:18.595Z",
"__v": 0
},
{
"_id": "5f9647d53947a600047aebc5",
"elementID": "5f43c42ca2f5bb0004bdaf54",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Buffer Water Tank",
"descriptionpage": "Buffer Water Tank",
"detail": "The subsections for this item cover a collection of Buffer Water Tanks for belt conveyor dust suppression systems.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5dd7b526e363bf4554744f52",
"slug": "buffer-water-tank"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Buffer Water Tank",
"detail": "The subsections for this item cover a collection of Buffer Water Tanks for belt conveyor dust suppression systems.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:51:49.549Z",
"__v": 0
},
{
"_id": "5f96481b3947a600047aebc6",
"elementID": "5f687c96925c5900046c5cfe",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Pump Station",
"descriptionpage": "Pump Station",
"detail": "The subsections for this item cover a collection of Pump Stations for belt conveyor dust suppression.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"Pressure",
"Flow Rate",
"Power"
],
"tabs": [],
"parent": "5dd7b526e363bf4554744f52",
"slug": "pump-station"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Pump Station",
"detail": "The subsections for this item cover a collection of Pump Stations for belt conveyor dust suppression.",
"childType": "5f6b1d4ca212cd0004584c66",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:52:59.920Z",
"__v": 0
},
{
"_id": "5f965a0f3947a600047aebc8",
"elementID": "5a2a2be92e1c1330dc94eaf1",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Joining",
"descriptionpage": "Belt Joining",
"detail": "The subsections for this item cover a collection of bought out items for belt joining products",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "belt-joining"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Joining",
"detail": "The subsections for this item cover a collection of bought out items for belt joining products",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:09:35.131Z",
"__v": 0
},
{
"_id": "5f9664ef3947a600047aebe2",
"elementID": "5a437ca27f653f539c65ba04",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Pull Switches (Pull keys) ",
"descriptionpage": "Pull Switches (Pull keys) ",
"detail": "A conveyor trip switch (pull key) is an emergency stop switch which provides the facility to stop the conveyor electrically at any point along the conveyor. The pulling distance recommended for the conveyor trip switch is 100m from each side.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1fc82e1c1330dc94eae8",
"slug": "pull-switches-pull-keys"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Pull Switches (Pull keys) ",
"detail": "A conveyor trip switch (pull key) is an emergency stop switch which provides the facility to stop the conveyor electrically at any point along the conveyor. The pulling distance recommended for the conveyor trip switch is 100m from each side.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:55:59.875Z",
"__v": 0
},
{
"_id": "5f9645853947a600047aebc0",
"elementID": "5ddfb90efc113706904cb108",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Material Storage",
"descriptionpage": "Material Storage",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor material storage systems.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "material-storage"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Material Storage",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor material storage systems.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:41:57.790Z",
"__v": 0
},
{
"_id": "5f9645ec3947a600047aebc1",
"elementID": "5ddfb92afc113706904cb109",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Level Measurement",
"descriptionpage": "Level Measurement",
"detail": "The subsections for this item cover a collection of level measurement systems for belt conveyor material storage assemblies.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"Supplier",
"Part Number"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5ddfb90efc113706904cb108",
"slug": "level-measurement"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Level Measurement",
"detail": "The subsections for this item cover a collection of level measurement systems for belt conveyor material storage assemblies.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:43:40.334Z",
"__v": 0
},
{
"_id": "5f96596a3947a600047aebc7",
"elementID": "5f89470f7f55db00045b32f8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Controller Systems ",
"descriptionpage": "Controller Systems ",
"detail": "Most belt safety protection equipment is sold with end to end system integration. The categories in this sub-section describe various belt safety devices system integration points.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "controller-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Controller Systems ",
"detail": "Most belt safety protection equipment is sold with end to end system integration. The categories in this sub-section describe various belt safety devices system integration points.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:06:50.057Z",
"__v": 0
},
{
"_id": "5f965e313947a600047aebd2",
"elementID": "5a2a1c6c2e1c1330dc94eac5",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Blocked Chute Probes",
"descriptionpage": "Blocked chute probes",
"detail": "A collection of blocked chute probe products for belt conveyor transfer chutes.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1c482e1c1330dc94eac3",
"slug": "blocked-chute-probes"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Blocked Chute Probes",
"detail": "A collection of blocked chute probe products for belt conveyor transfer chutes.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:27:13.436Z",
"__v": 0
},
{
"_id": "5f965e893947a600047aebd3",
"elementID": "5a55f92c3229f04620885349",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Tilt Switch",
"descriptionpage": "Tilt Switch",
"detail": "A collection of tilt switch products for belt conveyor transfer chutes.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"producttable",
"New"
],
"parent": "5a2a1c6c2e1c1330dc94eac5",
"slug": "tilt-switch"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Tilt Switch",
"detail": "A collection of tilt switch products for belt conveyor transfer chutes.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:28:41.553Z",
"__v": 0
},
{
"_id": "5f9664273947a600047aebde",
"elementID": "5f64885de144a40004a7649b",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Flange Coupling",
"descriptionpage": "Flange Coupling",
"detail": "Flange coupling is a type of Coupling used between rotating shafts that consists of flanges one of which is fixed at the end of each shaft.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"description",
"detail",
"order"
],
"tabs": [],
"parent": "5a2a1ca52e1c1330dc94eac8",
"slug": "flange-coupling"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Flange Coupling",
"detail": "Flange coupling is a type of Coupling used between rotating shafts that consists of flanges one of which is fixed at the end of each shaft.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:52:39.843Z",
"__v": 0
},
{
"_id": "5f9664bb3947a600047aebe0",
"elementID": "5a2a1fe02e1c1330dc94eaea",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Head End Control Unit",
"descriptionpage": "Head End Control Unit",
"detail": "The HECU controls, monitors, and supervises the Long Line Protection System. They integrate the individual belt safety devices, and interface to any SCADA or PLC control systems. ",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5f89470f7f55db00045b32f8",
"slug": "head-end-control-unit"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Head End Control Unit",
"detail": "The HECU controls, monitors, and supervises the Long Line Protection System. They integrate the individual belt safety devices, and interface to any SCADA or PLC control systems. ",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:55:07.106Z",
"__v": 0
},
{
"_id": "5f7d39854bd5580004e7f002",
"elementID": "5a5334b094a70b3af4f39a1e",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Vertical Sheaves",
"detail": "Dymot sheave wheels are supplied, assembled in vertical or horizontal brackets with bearings as shown overleaf or with just shaft, keep plate and bearings. All sheave wheels are of welded steel construction. SHEAVE WHEEL FEATURES ● Robust design for mounting in tension or in compression. ● High bending ratios for ropes. ● Accessible lubrication points. ● Various sizes for different ropes & loads. ● Sheaves are fabricated and fully machined. ● Custom built sheaves are also available. ● Rope keeps to prevent rope from climbing off Sheave groove.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Rope Diameter",
"Root Diameter",
"Mass",
"Supplier"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1d8f2e1c1330dc94ead5",
"slug": "vertical-sheaves"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Vertical Sheaves",
"detail": "Dymot sheave wheels are supplied, assembled in vertical or horizontal brackets with bearings as shown overleaf or with just shaft, keep plate and bearings. All sheave wheels are of welded steel construction. SHEAVE WHEEL FEATURES ● Robust design for mounting in tension or in compression. ● High bending ratios for ropes. ● Accessible lubrication points. ● Various sizes for different ropes & loads. ● Sheaves are fabricated and fully machined. ● Custom built sheaves are also available. ● Rope keeps to prevent rope from climbing off Sheave groove.",
"childType": "5a53357494a70b3af4f39a21",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:44:05.298Z",
"__v": 0
},
{
"_id": "5f7d3a8e4bd5580004e7f006",
"elementID": "5b29e2c3d16db96de8de3a7e",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Screw take-up Products",
"descriptionpage": "Screw take-up Products",
"detail": "Screw take-ups are used as tensioning systems for smaller belt conveyor systems.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5b29e2a7d16db96de8de3a7c",
"slug": "screw-take-up-products"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Screw take-up Products",
"detail": "Screw take-ups are used as tensioning systems for smaller belt conveyor systems.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:48:30.537Z",
"__v": 0
},
{
"_id": "5f8916cd7f55db00045b32eb",
"elementID": "5a2a1ea62e1c1330dc94eada",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Audio Visual Alarms",
"descriptionpage": "Audio Visual Alarms",
"detail": "Based on legislation , one or more devices are to be fitted and used to give all persons at any point ,where access to the conveyer belt installation is possible sufficient, prior warning for a period to be determined by the mines risk assessment, with a minimum period of 10 seconds, that any part of such a conveyer belt installation is about to be put into motion; The categories in this sub-section describe various belt safety devices used as Audio Visual Alarms.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "audio-visual-alarms"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Audio Visual Alarms",
"detail": "Based on legislation , one or more devices are to be fitted and used to give all persons at any point ,where access to the conveyer belt installation is possible sufficient, prior warning for a period to be determined by the mines risk assessment, with a minimum period of 10 seconds, that any part of such a conveyer belt installation is about to be put into motion; The categories in this sub-section describe various belt safety devices used as Audio Visual Alarms.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T03:43:09.396Z",
"__v": 0
},
{
"_id": "5f891c237f55db00045b32f1",
"elementID": "5a55f4813229f0462088533c",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Tachometer Relay",
"descriptionpage": "Tachometer Relay",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. This can be done effectively by monitoring the speed variance between the conveyor belt and drive pulley RPM or the motor arrangements (powerpack) RPM. The categories in this sub-section describe various belt safety devices used as tachometer relays.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"producttable",
"New"
],
"parent": "5a2a1f372e1c1330dc94eae1",
"slug": "tachometer-relay"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Tachometer Relay",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. This can be done effectively by monitoring the speed variance between the conveyor belt and drive pulley RPM or the motor arrangements (powerpack) RPM. The categories in this sub-section describe various belt safety devices used as tachometer relays.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T04:05:55.355Z",
"__v": 0
},
{
"_id": "5f894e347f55db00045b330e",
"elementID": "5ddf920efc113706904cb0f8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Pigtails",
"detail": "Pigtails are used to support the pull wire trip switch cable.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1fc82e1c1330dc94eae8",
"slug": "pigtails"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Pigtails",
"detail": "Pigtails are used to support the pull wire trip switch cable.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T07:39:32.705Z",
"__v": 0
},
{
"_id": "5f8954007f55db00045b3316",
"elementID": "5f4c9c54d9deb40004a8b0d8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Rip Detectors Device",
"descriptionpage": "Belt Rip Detectors Device",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt rip detectors.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5f4c9bfdd9deb40004a8b0d6",
"slug": "belt-rip-detectors-device"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Rip Detectors Device",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. The categories in this sub-section describe various belt safety devices used as belt rip detectors.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T08:04:16.216Z",
"__v": 0
},
{
"_id": "5f8954a57f55db00045b3317",
"elementID": "5a2a200b2e1c1330dc94eaed",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Metal Detectors",
"descriptionpage": "Metal Detectors",
"detail": "Tramp metal on a conveyor can cause damage to the belt, idlers and chutes. The sub-section to follow describes options for metal detection on a conveyor belt.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "591a8d4bcb21ed397487c123",
"slug": "metal-detectors"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Metal Detectors",
"detail": "Tramp metal on a conveyor can cause damage to the belt, idlers and chutes. The sub-section to follow describes options for metal detection on a conveyor belt.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T08:07:01.265Z",
"__v": 0
},
{
"_id": "5f9641b93947a600047aebb7",
"elementID": "5f4398e4489bee000435568b",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Fire extinguisher",
"descriptionpage": "Fire extinguisher",
"detail": "It is advised that a fire extinguisher be available at every drive and at every head and tail pulley, a 9 kg hand-held DCP fire extinguisher must be provided in an easily accessible position.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5f4398ac489bee0004355688",
"slug": "fire-extinguisher"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Fire extinguisher",
"detail": "It is advised that a fire extinguisher be available at every drive and at every head and tail pulley, a 9 kg hand-held DCP fire extinguisher must be provided in an easily accessible position.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:25:45.081Z",
"__v": 0
},
{
"_id": "5f96448e3947a600047aebbd",
"elementID": "5a2a1ca52e1c1330dc94eac8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Power Pack Components",
"descriptionpage": "Power Pack Components",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor power pack assemblies.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "power-pack-components"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Power Pack Components",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor power pack assemblies.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:37:50.959Z",
"__v": 0
},
{
"_id": "5f965dc33947a600047aebd1",
"elementID": "5a03f0c77403640828d7e1e9",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Chute Sealing System",
"descriptionpage": "Chute Sealing System",
"detail": "As most materials handling system transport large amounts for material, even small quantities of spillage at transfer points can create unmanageable levels of spillage. As a result of this chute sealing is critical on most conveyors in avoiding labor intensive cleaning and belt damage.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1a9a2e1c1330dc94eab8",
"slug": "chute-sealing-system"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Chute Sealing System",
"detail": "As most materials handling system transport large amounts for material, even small quantities of spillage at transfer points can create unmanageable levels of spillage. As a result of this chute sealing is critical on most conveyors in avoiding labor intensive cleaning and belt damage.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:25:23.618Z",
"__v": 0
},
{
"_id": "5f965f2d3947a600047aebd7",
"elementID": "5b82bcb7d66c227328cd0bce",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Chute Flange Sealer",
"descriptionpage": "Chute Flange Sealer",
"detail": "A collection of chute flange sealing products for belt conveyor transfer chutes.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"Supplier",
"Part Number"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"producttable",
"New"
],
"parent": "5b82bc93d66c227328cd0bcd",
"slug": "chute-flange-sealer"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Chute Flange Sealer",
"detail": "A collection of chute flange sealing products for belt conveyor transfer chutes.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:31:25.955Z",
"__v": 0
},
{
"_id": "5f96640f3947a600047aebd9",
"elementID": "5a5498a49728ec03888c264b",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Mechanical Joins",
"descriptionpage": "Mechanical Joins",
"detail": "A mechanical fastener(join) is a device that is used to mechanically join (or fasten or affixes) the ends of two pieces of belt conveyor. ",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Product Size",
"Minimum Pulley Diameter",
"Belt Tension Limit",
"Belt thickness"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a2be92e1c1330dc94eaf1",
"slug": "mechanical-joins"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Mechanical Joins",
"detail": "A mechanical fastener(join) is a device that is used to mechanically join (or fasten or affixes) the ends of two pieces of belt conveyor. ",
"childType": "5a5498cc9728ec03888c264d",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:52:15.552Z",
"__v": 0
},
{
"_id": "5f9664213947a600047aebdc",
"elementID": "5f646309d529bc000409e863",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Carry Belt Tracking Systems",
"descriptionpage": "Carry Belt Tracking Systems",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. Wandering can be improved through the installation of belt tracking systems. The categories in this sub-section describe various carry belt tracking equipment options.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a1c322e1c1330dc94eac2",
"slug": "carry-belt-tracking-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Carry Belt Tracking Systems",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. Wandering can be improved through the installation of belt tracking systems. The categories in this sub-section describe various carry belt tracking equipment options.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:52:33.480Z",
"__v": 0
},
{
"_id": "5f9665123947a600047aebe3",
"elementID": "5f646242d529bc000409e85f",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Impact Idler Systems",
"descriptionpage": "Impact Idler Systems",
"detail": "Impact Idlers Systems - used for high impact applications that use impact idlers. Wherever material is loaded onto a conveyor belt, impact idlers are installed beneath the troughed belt over the full loading length. Impact idlers sets are spaced at intervals of typically 350 mm to 450 mm to provide a comprehensive support base for the belt.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a1c132e1c1330dc94eac0",
"slug": "impact-idler-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Impact Idler Systems",
"detail": "Impact Idlers Systems - used for high impact applications that use impact idlers. Wherever material is loaded onto a conveyor belt, impact idlers are installed beneath the troughed belt over the full loading length. Impact idlers sets are spaced at intervals of typically 350 mm to 450 mm to provide a comprehensive support base for the belt.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:56:34.240Z",
"__v": 0
},
{
"_id": "5f7d39924bd5580004e7f003",
"elementID": "5a53354c94a70b3af4f39a20",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Horizontal Sheaves",
"detail": "Dymot sheave wheels are supplied, assembled in vertical or horizontal brackets with bearings as shown overleaf or with just shaft, keep plate and bearings. All sheave wheels are of welded steel construction. SHEAVE WHEEL FEATURES ● Robust design for mounting in tension or in compression. ● High bending ratios for ropes. ● Accessible lubrication points. ● Various sizes for different ropes & loads. ● Sheaves are fabricated and fully machined. ● Custom built sheaves are also available. ● Rope keeps to prevent rope from climbing off Sheave groove.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Rope Diameter",
"Root Diameter",
"Mass",
"Supplier"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1d8f2e1c1330dc94ead5",
"slug": "horizontal-sheaves"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Horizontal Sheaves",
"detail": "Dymot sheave wheels are supplied, assembled in vertical or horizontal brackets with bearings as shown overleaf or with just shaft, keep plate and bearings. All sheave wheels are of welded steel construction. SHEAVE WHEEL FEATURES ● Robust design for mounting in tension or in compression. ● High bending ratios for ropes. ● Accessible lubrication points. ● Various sizes for different ropes & loads. ● Sheaves are fabricated and fully machined. ● Custom built sheaves are also available. ● Rope keeps to prevent rope from climbing off Sheave groove.",
"childType": "5a53357494a70b3af4f39a21",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:44:18.147Z",
"__v": 0
},
{
"_id": "5f7d39f04bd5580004e7f004",
"elementID": "5b29e2a7d16db96de8de3a7c",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Screw Take-ups",
"descriptionpage": "Screw Take-ups",
"detail": "Screw take-ups are used as tensioning systems for smaller belt conveyor systems. ",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1ac92e1c1330dc94eab9",
"slug": "screw-take-ups"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Screw Take-ups",
"detail": "Screw take-ups are used as tensioning systems for smaller belt conveyor systems. ",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:45:52.033Z",
"__v": 0
},
{
"_id": "5f7d3b194bd5580004e7f007",
"elementID": "5a2a1ac92e1c1330dc94eab9",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Take-up Assembly",
"descriptionpage": "Take-up Assembly",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor Take-up Assemblies.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "take-up-assembly"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Take-up Assembly",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor Take-up Assemblies.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-07T03:50:49.265Z",
"__v": 0
},
{
"_id": "5f891bc07f55db00045b32f0",
"elementID": "5a55f3fb3229f0462088533a",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Speed Sensor",
"descriptionpage": "Belt Speed Sensor",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. This can be done effectively by monitoring the speed variance between the conveyor belt and drive pulley RPM or the motor arrangements (powerpack) RPM. The categories in this sub-section describe various belt safety devices used as Belt Speed Sensors.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"producttable",
"New"
],
"parent": "5a2a1f372e1c1330dc94eae1",
"slug": "belt-speed-sensor"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Speed Sensor",
"detail": "Based on legislation the driving machinery of the conveyor belt installation is required to be stopped should the belt break, jam or slip excessively. This can be done effectively by monitoring the speed variance between the conveyor belt and drive pulley RPM or the motor arrangements (powerpack) RPM. The categories in this sub-section describe various belt safety devices used as Belt Speed Sensors.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T04:04:16.999Z",
"__v": 0
},
{
"_id": "5f8956fc7f55db00045b331f",
"elementID": "5f89559a7f55db00045b3319",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Metal Detection devices",
"descriptionpage": "Metal Detection devices",
"detail": "Designed for applications requiring detection of bucket teeth and other large damaging pieces of ferrous and nonferrous metals",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a200b2e1c1330dc94eaed",
"slug": "metal-detection-devices"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Metal Detection devices",
"detail": "Designed for applications requiring detection of bucket teeth and other large damaging pieces of ferrous and nonferrous metals",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T08:17:00.581Z",
"__v": 0
},
{
"_id": "5f895c207f55db00045b3325",
"elementID": "5a2a1c322e1c1330dc94eac2",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Tracking Systems",
"descriptionpage": "Belt Tracking Systems",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. Wandering can be improved through the installation of belt tracking systems. The categories in this sub-section describe various belt tracking equipment options.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "belt-tracking-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Tracking Systems",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. Wandering can be improved through the installation of belt tracking systems. The categories in this sub-section describe various belt tracking equipment options.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-16T08:38:56.497Z",
"__v": 0
},
{
"_id": "5f9640b23947a600047aebb6",
"elementID": "5b0d3a884dbfa62894d30014",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Walkways",
"descriptionpage": "Walkways",
"detail": "The subsections for this item cover a collection of bought out items on belt conveyor walkways.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "walkways"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Walkways",
"detail": "The subsections for this item cover a collection of bought out items on belt conveyor walkways.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:21:22.178Z",
"__v": 0
},
{
"_id": "5f9643fa3947a600047aebbb",
"elementID": "5f6d82b3a059ab00045cd706",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Low Speed Holdback",
"descriptionpage": "Low Speed Holdback",
"detail": "A collection of Low Speed Backstops with lever arm, these systems make use of sealed sprag freewheels with ball bearings which prevent a conveyor from running backwards in stop condition.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description",
"Torque Rating",
"Max Over - running speed",
"Bore Max"
],
"tabs": [],
"parent": "5a2a1ca52e1c1330dc94eac8",
"slug": "low-speed-holdback"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Low Speed Holdback",
"detail": "A collection of Low Speed Backstops with lever arm, these systems make use of sealed sprag freewheels with ball bearings which prevent a conveyor from running backwards in stop condition.",
"childType": "5f6d8361a059ab00045cd709",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:35:22.229Z",
"__v": 0
},
{
"_id": "5f96462b3947a600047aebc2",
"elementID": "5f4398ac489bee0004355688",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Fire Detection and Suppression",
"descriptionpage": "Fire Detection and Suppression",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor Fire Detection and Suppression",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"tabs": [],
"parent": "#",
"slug": "fire-detection-and-suppression"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Fire Detection and Suppression",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor Fire Detection and Suppression",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T03:44:43.396Z",
"__v": 0
},
{
"_id": "5f965d0e3947a600047aebce",
"elementID": "5a2a1c482e1c1330dc94eac3",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Transfer Chute Products",
"descriptionpage": "Transfer Chute Products",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor transfer chutes.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "#",
"slug": "transfer-chute-products"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Transfer Chute Products",
"detail": "The subsections for this item cover a collection of bought out items for belt conveyor transfer chutes.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:22:22.443Z",
"__v": 0
},
{
"_id": "5f965d503947a600047aebcf",
"elementID": "5a2a1a9a2e1c1330dc94eab8",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Sealing Systems",
"descriptionpage": "Belt Sealing Systems",
"detail": "A collection of sealing products for belt conveyor transfer chutes.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1c482e1c1330dc94eac3",
"slug": "belt-sealing-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Sealing Systems",
"detail": "A collection of sealing products for belt conveyor transfer chutes.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:23:28.779Z",
"__v": 0
},
{
"_id": "5f965ecd3947a600047aebd5",
"elementID": "5caddee7cf4cf1512808dc2d",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Microwave Switch",
"descriptionpage": "Microwave Switch",
"detail": "A collection of microwave switch products for belt conveyor transfer chutes.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5a2a1c6c2e1c1330dc94eac5",
"slug": "microwave-switch"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Microwave Switch",
"detail": "A collection of microwave switch products for belt conveyor transfer chutes.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:29:49.838Z",
"__v": 0
},
{
"_id": "5f965f313947a600047aebd8",
"elementID": "5b82bc93d66c227328cd0bcd",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Chute Flange Sealing",
"descriptionpage": "Chute Flange Sealing",
"detail": "A collection of chute flange sealing products for belt conveyor transfer chutes.",
"template": "group",
"icon": "far fa-folder",
"headings": [
"description",
"detail",
"order"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1c482e1c1330dc94eac3",
"slug": "chute-flange-sealing"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Chute Flange Sealing",
"detail": "A collection of chute flange sealing products for belt conveyor transfer chutes.",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:31:29.226Z",
"__v": 0
},
{
"_id": "5f96641e3947a600047aebdb",
"elementID": "5f64629cd529bc000409e860",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Slider (Skega) Beds",
"descriptionpage": "Slider (Skega) Beds",
"detail": "Slider (Skega) Beds utilize UHMW slider bars, the base layer is a highly elastic rubber compound to absorb the material impact, and the UHMW provides a wear resistant low friction running surface for the belt. Slider beds are well suited to dusty environments, as the bed provides a flat surface on the belt to allow a competent seal for any skirting.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a1c132e1c1330dc94eac0",
"slug": "slider-skega-beds"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Slider (Skega) Beds",
"detail": "Slider (Skega) Beds utilize UHMW slider bars, the base layer is a highly elastic rubber compound to absorb the material impact, and the UHMW provides a wear resistant low friction running surface for the belt. Slider beds are well suited to dusty environments, as the bed provides a flat surface on the belt to allow a competent seal for any skirting.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:52:30.379Z",
"__v": 0
},
{
"_id": "5f9664243947a600047aebdd",
"elementID": "5f646319d529bc000409e864",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Return Belt Tracking Systems",
"descriptionpage": "Return Belt Tracking Systems",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. Wandering can be improved through the installation of belt tracking systems. The categories in this sub-section describe various return belt tracking equipment options.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"tabs": [],
"parent": "5a2a1c322e1c1330dc94eac2",
"slug": "return-belt-tracking-systems"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Return Belt Tracking Systems",
"detail": "Conveyor Belts tend to “wander” along their lateral axis. This can be for many reasons, from installation, repair, and operation, and can vary over time of day, and life of mine. Wandering can be improved through the installation of belt tracking systems. The categories in this sub-section describe various return belt tracking equipment options.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:52:36.566Z",
"__v": 0
},
{
"_id": "5f9664923947a600047aebdf",
"elementID": "5a2a1ee42e1c1330dc94eadd",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Belt Arrestors",
"descriptionpage": "Belt Arrestors",
"detail": "Designed and developed to catch (arrest) any incline conveyor belt that brakes or snaps due to normal wear and tear on incline conveyor systems. The Conveyor Belt Arrestor is mounted below the head pulley where the most belt breakages occur. The Conveyor Belt Arrestor catches both the top and bottom conveyor belts within 0.3 of a second and prevents it from running back down the incline. Both ends are then near facilitate easy splicing.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [],
"parent": "5a2a1f662e1c1330dc94eae3",
"slug": "belt-arrestors"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Belt Arrestors",
"detail": "Designed and developed to catch (arrest) any incline conveyor belt that brakes or snaps due to normal wear and tear on incline conveyor systems. The Conveyor Belt Arrestor is mounted below the head pulley where the most belt breakages occur. The Conveyor Belt Arrestor catches both the top and bottom conveyor belts within 0.3 of a second and prevents it from running back down the incline. Both ends are then near facilitate easy splicing.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2020-10-26T05:54:26.728Z",
"__v": 0
},
{
"_id": "6049f8c14c77b6543048935c",
"permissions": {
"Write": [],
"Admin": [],
"Read": [],
"Organization": []
},
"elementID": "5b0d3ab94dbfa62894d30017",
"revision": "revision",
"active": "true",
"calculation": "false",
"name": "Hinge Kits",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"entry": {
"description": "Hinge Kits",
"descriptionpage": "Hinge Kits",
"detail": "Standard Hinge Kits suitable for walkway gates on a belt conveyor.",
"template": "products",
"icon": "fas fa-shopping-cart",
"headings": [
"Image",
"Description"
],
"layout": "addcomp,parentraw,copy",
"tabs": [
"tablecomponent",
"New"
],
"parent": "5b0d3a9b4dbfa62894d30015",
"slug": "hinge-kits"
},
"parentid": "58d222d18d9bfd28846eb792",
"userID": "5aa23359e16f3a41e84eaa9a",
"detail": "Standard Hinge Kits suitable for walkway gates on a belt conveyor.",
"created": "2021-03-11T11:02:25.967Z",
"__v": 0
},
{
"_id": "607442b0aa2b218fd8fd8a16",
"permissions": {
"Write": [],
"Admin": [],
"Read": [],
"Organization": []
},
"elementID": "591bd48723ccb623685bafaa",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Conveyor Belt Ploughs",
"descriptionpage": "Conveyor Belt Ploughs",
"detail": "Conveyor Belt Ploughs are installed to reduce carry back on a belt conveyor system. When material gets onto the return belt, it is carried back to the tail pulley. This “carry back “is likely to cause belt cover damage, lagging damage, tracking issues, and in extreme cases belt damage or belt tears. They are generally divided into single side discharge(bias-plough) or double side discharge (V-plough).",
"template": "products",
"icon": "fas fa-shopping-cart",
"parent": "591bceab23ccb623685baf82",
"headings": [
"Image",
"Description"
],
"tools": [],
"slug": "conveyor-belt-ploughs"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Conveyor Belt Ploughs",
"detail": "Conveyor Belt Ploughs are installed to reduce carry back on a belt conveyor system. When material gets onto the return belt, it is carried back to the tail pulley. This “carry back “is likely to cause belt cover damage, lagging damage, tracking issues, and in extreme cases belt damage or belt tears. They are generally divided into single side discharge(bias-plough) or double side discharge (V-plough).",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2021-04-12T12:53:04.582Z",
"__v": 0
},
{
"_id": "6135fd2268ea46d288fdaca5",
"permissions": {
"Write": [],
"Admin": [],
"Read": [],
"Organization": []
},
"elementID": "6049f8514c77b65430489356",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Dog House Sheeting",
"descriptionpage": "Dog House Sheeting",
"detail": "Dog House Sheeting, Bull Housing, Half Moon Covers. Sheeting for wind protection of conveyor systems.",
"template": "products",
"icon": "fas fa-shopping-cart",
"parent": "5b0d3a884dbfa62894d30014",
"headings": [
"Image",
"Description"
],
"tools": [],
"slug": "dog-house-sheeting"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Dog House Sheeting",
"detail": "Dog House Sheeting, Bull Housing, Half Moon Covers. Sheeting for wind protection of conveyor systems.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2021-09-06T11:36:02.803Z",
"__v": 0
},
{
"_id": "6279ff948847dcd6a865217d",
"permissions": {
"Write": [],
"Admin": [],
"Read": [],
"Organization": []
},
"elementID": "6279ff868847dcd6a8652121",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Electrical Components",
"descriptionpage": "Electrical Components",
"detail": "Electrical Components",
"template": "group",
"icon": "far fa-folder",
"parent": "#",
"headings": [
"description",
"detail",
"order"
],
"tools": [],
"slug": "electrical-components"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Electrical Components",
"detail": "Electrical Components",
"childType": "58aa74140b9d3241280ecf17",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2022-05-10T06:00:52.566Z",
"__v": 0
},
{
"_id": "6279ffcb8847dcd6a865234f",
"permissions": {
"Write": [],
"Admin": [],
"Read": [],
"Organization": []
},
"elementID": "5e3fd34387e5c539b89e9193",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Cable Racks",
"descriptionpage": "Cable Racks",
"detail": "A collection of cable racking products for belt conveyors.",
"template": "products",
"icon": "fas fa-shopping-cart",
"parent": "6279ff868847dcd6a8652121",
"headings": [
"Image",
"Description"
],
"tools": [],
"slug": "cable-racks"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Cable Racks",
"detail": "A collection of cable racking products for belt conveyors.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2022-05-10T06:01:47.352Z",
"__v": 0
},
{
"_id": "6279ffcf8847dcd6a8652376",
"permissions": {
"Write": [],
"Admin": [],
"Read": [],
"Organization": []
},
"elementID": "5bcf5ede6b1f164294a25db3",
"revision": "revision",
"active": "true",
"calculation": "false",
"entry": {
"description": "Custom Cable Brackets",
"descriptionpage": "Custom Cable Brackets",
"detail": "A collection of custom cable racking products for belt conveyors.",
"template": "products",
"icon": "fas fa-shopping-cart",
"parent": "6279ff868847dcd6a8652121",
"headings": [
"Image",
"Description"
],
"tools": [],
"slug": "custom-cable-brackets"
},
"parentid": "58d222d18d9bfd28846eb792",
"name": "Custom Cable Brackets",
"detail": "A collection of custom cable racking products for belt conveyors.",
"childType": "58e87f3f186e7b0ad4a7c5a3",
"userID": "5aa23359e16f3a41e84eaa9a",
"created": "2022-05-10T06:01:51.666Z",
"__v": 0
}
]
For more advanced projects , login and create a conveyor.
Table Search
Navigation
Use the navigation tree to interact with the shop.
-
Belt Cleaning Systems
-
Belt Illumination
-
Belt Joining
-
Belt Safety Equipment
-
Belt Support Systems
-
Belt Tracking Systems
-
Dust Suppression Products
-
Electrical Components
-
Fire Detection and Suppression
-
Material Storage
-
Power Pack Components
-
Take-up Assembly
-
Transfer Chute Products
-
Walkways
-
Wheel Drive Systems
Load Cell Units
A load cell is a force transducer that converts a force such as tension, compression, pressure, or torque into an electrical signal that can be measured and standardized.
The following items are available :
Load Cells Products
A load cell is a force transducer that converts a force such as tension, compression, pressure, or torque...