Impact 5 Roll
Due to variations in material characteristics and physical conveyor design (Height and length), the selection of idlers is unique to most applications. The items in this section are grouped design parameters for carrying idlers used on this site.
| Number of Rolls(per base) | Idler Roll Width (mm) | C (kN) | D (mm) | E (mm) | Frame Mass (Kg) | Rotating Mass (Kg) | Url | Roll Mass (Kg) | Idler Set Mass (Kg) | Image | Idler Gauge Length (mm) | Length of Flat (mm) | Nominal Wall Thickness (mm) | D - Outer race diameter (mm) | B - Bearing width (mm) | Seal Thickness (mm) | Designation | Limiting speed (r/min) | Reference speed (r/min) | C0 (kN) | Pu (kN) | A (mm) | Shell Mass (Kg) | Bearing Housing Mass (Kg) | D - Circlip (mm) | b - Circlip (mm) | t - Circlip (mm) | Idler Seal Design | % Bearing Width (%) | Shell Weld (mm) | Idler Type | Roll Diameter (mm) | Idler Frame Design | Shaft Series (mm) | Belt Width (mm) | Wing Roll Angle (Degree) | Idler Roll Material | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 475 | 188 | - | - | 73.7 | 12.3 | Link | 15.9 | 153 |
|
485 | 14 | Impact 5 Roll | 159 | Troughing 5 Roll | 35 | 2100 | 45 | Rubber Disk | |||||||||||||||||||
| 5 | 340 | Link |
|
350 | 14 | Impact 5 Roll | 159 | 3 Roll, offset, top mounted, tubular | 35 | 1500 | 45 | Rubber Disk | ||||||||||||||||||||||||||
| 5 | 400 | 29.6 | 6.68 | Link |
|
410 | 14 | 4 | 72 | 19 | 19.00 | 6306 | 13000 | 20000 | 16 | 0.67 | 2058 | 6.12 | 0.56 | 27.9 | 3.5 | 1.5 | Integral Bearing Sealing | 100 | 4 | Impact 5 Roll | 159 | Troughing 5 Roll | 30 | 1800 | Rubber Disk |
Sign up for free to join this conversation on ShiftBulk.
Already have an account? Sign in to comment
Already have an account? Sign in to comment